Published Papers

以下是引用Hyrel设备发表的作品列表.

Count

截至2022年2月21日已有315份文件.

非传统的制造

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; Electro-Spinning or Electro-Melt-Spinning or Melt Electro-Writing (MEW); also printing with Embedded Fibers and combining FDM with DIW or MEW.

Published in 2021

• Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles a thesis presented to 乔治亚南方大学
• 骨重建用生物支架的设计与制造综述 by a team from 机械工程学院 Vellore Institute of Technology, India
• 用TiS3准一维范德华材料油墨印刷电子器件 by a team from 加州大学河滨分校 and 内布拉斯加大学林肯分校
• 热敏药物的3D打印 by a team from the 南澳大利亚大学 and Addis Ababa University
• 可穿戴设备的汗液增强导电性的可打印橡胶电极 by a team from the 南洋理工大学材料科学与工程学院 and the 武汉大学电气工程与自动化学院
• 欠驱动软机器人的最优软复合材料 by a team from 新加坡科技与设计大学
• Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends
• 3D打印的电响应PVC凝胶驱动器by a team from the 机械与航空航天工程 and 材料科学与工程 departments of 加州大学圣地亚哥分校
• 4D打印与生物基聚合物自适应可穿戴设备，符合设计创新硕士学位要求
• 软机电元件的自动化纤维嵌入 by a team from the 制造及设计中心 of the 新加坡科技与设计大学
• Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots by a team from the 制造及设计中心 and the 工程产品开发支柱 of the 新加坡科技与设计大学
• 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges 由一个工程学院的团队 Deakin University, 墨尔本大学, UCLA, and Georgia Tech
• Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates, by a team from the 克莱姆森大学机械工程系

Published in 2020

• 变形电路:一种集成设计, Simulation, 和自变形电子学制造工作流程 by a team from 卡内基梅隆大学 and Zhejiang Univeristy, China
• An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing by a team from 橡树岭国家实验室, Virginia Tech, and Oklahoma Stata University, funded by the 国家科学基金会 and the Office of Naval Research
• 智能假体衬垫增材制造技术 由一个由几个部门组成的团队 University College London in cooperation with the 英国斯坦莫尔皇家国立骨科医院
• 无滑脱铁氧体感应磁芯膏体挤压3D打印指南 by a team from Virginia Tech's 材料科学与工程系, 电力电子系统中心“，, and 布莱德利电气与计算机工程系
• 磁芯和3d打印恒磁通电感的可靠性评估 by a team from Virginia Tech and Texas Instruments
• 采用增材制造技术的z形弯曲微型化贴片天线 by a team from 安柏瑞德航空航天大学的航空航天工程
• 超声波辅助焊接过程润湿性分析, a thesis submitted to 克莱姆森大学机械工程系
• 固体剂型生产的专利申请 药学院和生物医学科学学院 of the University of Central Lancashire
• 软机电一体化用柔性光纤互连 by a team from the 新加坡理工大学(SUTD)

Published in 2019

• UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts by a team from 安柏瑞德航空航天大学的航空航天工程
• Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications by the 爱沙尼亚塔尔图大学药学院 and the Pharmeceutical Sciences laboratory at Abo Akademi University, Finland
• 壶芯恒磁通电感螺旋线圈的增材制造 by a team from the Material Science & 弗吉尼亚理工大学工程系
• 航空航天增材制造技术“， by NASA
• Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design by a team from the university Autónoma de Occidente de卡利-哥伦比亚 and the 瑞士西部应用科学与艺术大学

Published in 2018

• 3D打印胃居民电子设备 by a team from 麻省理工学院的科赫综合癌症研究所
• 3D打印胶囊定量区域吸收研究在胃肠道 by a team from Merck Pharmaceuticals
• 融合沉积模型:工程和医学进展 in 药品3D打印
• 用于3D打印的嵌段共聚物油墨配方和制作3D打印射频(RF)设备的方法 by a team from the 麻省理工学院 and Harvard University
• 增材制造中的混合工艺 由一个团队主要从 内布拉斯加大学林肯分校机械学系 & Materials Engineering

Published in 2017

• Additive Manufacturing of Toroid Inductor for Electronics Applications by Chao Ding, Virginia Tech
• 可展开天线的自驱动3D打印包装, by a team from Georgia Tech
• A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication by Smruti Ranjan Sahoo at 罗切斯特理工学院
• 使用增材微波谐振器的无电池无线传感器综述 in Sensors, a Journal of the 多学科数字出版学院

Published in 2016

• 电力电子用平面电感的增材制造 by a team from Virginia Tech
• A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives, 电气和电子工程师学会(IEEE)
• Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies，博士论文，发表于哈佛大学学术学院 佐治亚理工学院电子与计算机工程学院

Published in 2015

• 填充依赖3d打印材料基于NinjaFlex灯丝天线应用, 电气和电子工程师学会(IEEE)
• 基于3D打印技术和3D天线设计的新型应变传感器, 电气和电子工程师学会(IEEE)
• 一种新型三维打印环状天线，使用柔性NinjaFlex材料，用于可穿戴和物联网应用, 电气和电子工程师学会(IEEE)
• Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies, The IET Digital Library.
• 全3d打印射频结构的演示和表征, 电气和电子工程师学会(IEEE)
• RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments, 欧洲微波协会

非加热或冷藏库印刷(DIW)

也被称为Robocasting或DIW，直接墨水书写.

Published in 2022

• 木材翘曲复合材料3D打印 by a team from the 耶路撒冷希伯来大学
• 无添加剂，凝胶纳米墨作为层次结构的散装气凝胶的3D打印工具箱 by a team from 纳米结构与固体物理研究所，纳米混合结构研究中心(CHyN), 汉堡超快成像中心, 德国电子同步加速器中心x射线和纳米科学中心CXNS, 亥姆霍兹成像平台，德国电子同步加速器DESY, and 汉堡大学无机与应用化学研究所
• 金属氧化物与PVDF粘结剂的高温相互作用 by a team from 马里兰大学帕克分校
• 生态活性土壤结构的3D打印 by a team from the University of Virginia
• In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics by a team from Marmara University
• Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer by a team from 加州大学圣地亚哥分校
• 蓝色陶瓷:海草草甸修复变形陶瓷的共同设计 by a team from 卡内基梅隆大学, the 耶路撒冷希伯来大学, and Bezalel艺术与设计学院
• 含能铝基纳米复合材料点火调制的微波激发 by a tem from the 加州大学河滨分校, Georgia Tech, and the University of Maryland
• 直接墨水书写用预陶瓷聚合物的制备，博士论文投稿 田纳西大学诺克斯维尔分校
• 用化学脱落的1T-TaS2填料油墨印刷的电荷密度波器件, by a team from the Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, 电气与计算机工程系, 加州大学河滨分校, the 加州大学河滨分校化学与环境工程系, and the 佐治亚大学化学系
• Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine，博士论文投稿 东北大学化学工程系

Published in 2021

• Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors by a team from the 德克萨斯大学埃尔帕索分校 and the U.S. 堪萨斯城国家安全学校
• Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference 由一个由几个部门组成的团队 纽约州立大学布法罗分校
• 液晶直接墨水书写模式执行器 by a team from the 刺激响应功能材料实验室 & 埃因霍温理工大学化学工程与化学系的装置 and the 软物质响应中心, 机械工程系, 印度马德拉斯理工学院, 钦奈
• Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing by a team from Bío-Bío大学食品工程系 and 食品科学与化学技术系, 化学科学和药学学院, Universidad de Chile
• 透明硅胶弹性体的3D打印 by a team from 劳伦斯利弗莫尔国家实验室
• Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink by a team from the University of Florida
• 3d打印与水基固化相结合的4d驱动器 by a team from Helmholtz-Zentrum的活性聚合物研究所
• 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering by a team from Marmara University and Yildiz技术大学
• 影响印刷铝热剂衬底加热的因素 from Dr. Matthew Ervin, 美国陆军研究实验室
• 4D打印工程生活材料 由来自[http://www.tamu.edu/ 德克萨斯州的一个&M University
• Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets by a team from the University of Tartu and the University of Helsinki
• Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing by a team from the Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University
• Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles by a team from Georgia Tech's schools of 材料科学与工程学院 and 化学与生物分子工程学院
• Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance，一篇论文提交给a PhD in 安柏瑞德航空航天大学的航空航天工程
• 3D打印抗菌材料, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure by a team primarily from Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne
• Printable, cCastable, 纳米晶纤维素-环氧复合材料呈现珍珠状分层增韧 by a team from 机械工程系, Massachusetts Institute of Technolog, 保罗·帕斯卡研究中心, and 能源与环境多尺度材料科学，CNRS-MIT
• 3d打印电活性聚合物力致动器的大型和高精度光学镜像应用 by a team primarily from INSA-Lyon, France
• 脱细胞外周神经基质水凝胶的性质调控及生物学应用 by a team from 中山大学，中国广州
• Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers by a team from Purdue University and 德克萨斯大学圣安东尼奥分校
• 放热钎焊用增材制造活性材料架构 by a team from 范德比尔特大学工程学院
• Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials 由来自各个部门的团队 工程学院，德克萨斯A&M University
• 加成膜在选择性分离和捕获CO2方面的潜力 by a team from the 菲律宾大学矿业、冶金与材料工程系 and 化学与生物分子工程系与先进材料联合研究所, 田纳西大学诺克斯维尔分校
• 生物医学的社会技术结盟:超越技术融合的3D生物打印市场 by a team from University College London and University of Sussex
• 准一维范德华材料油墨印刷电子器件中的电荷传输, by a team from 加州大学河滨分校 and 内布拉斯加大学林肯分校
• Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models by a team from 橡树岭国家实验室 and the University of North Texas
• 金属化燃烧性能分析的快速加热和化学形态表征, 纳米尺度铝热剂和Pvdfbound固体推进剂成分这是一篇博士论文 马里兰大学化学与生物化学系
• 高可回收，机械各向同性和可愈合的3d打印弹性体聚脲玻璃 by a team from 橡树岭国家实验室's 化学科学部门 and 纳米材料科学中心“，, and the 化学与生物分子工程系 of the University of Tennessee
• UV固化在高负载系统中直接油墨书写的程度，一篇本科论文提交给 Georgia Tech
• The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review by a team from Shenzhen University
• 操作工经验对连续放置2毫米厚复合材料的能力的影响 by a team from the Department of Restorative Sciences, Dental College of Georgia at Augusta University
• 液晶介导的三维打印技术制备纳米有序层状结构 by a team from 新南威尔士大学, 汉诺威莱布尼茨大学,, Monash University, RMIT University, Shinshu University, Tokida, and 波尔多大学保罗·帕斯卡研究中心
• 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect by a team from 法国里昂里昂大学
• Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding by a team from 洛斯阿拉莫斯国家实验室, 美国能源部堪萨斯城国家安全校园, and 韩国科学技术研究院
• 石圆牙的持久性多形性:从一种新的生物矿物到增材制造的油墨 by a team from 西北大学材料科学与工程学院 and 先进的光子源，第三区，阿贡国家实验室
• ZrB2-SiC短切纤维陶瓷复合材料的直接墨水书写 by a team from the 田纳西大学诺克斯维尔分校, 佐治亚理工学院, and 空军研究实验室
• 3D打印的废咖啡渣衍生生物炭增强环氧树脂复合材料 by a team from Tuskegee University
• 光聚合快速固载纤维素纳米晶水凝胶的3D打印 by a team from the 耶路撒冷希伯来大学 and Politecnico di Torino
• 异磁耦合电感的增材制造 by a team from 弗吉尼亚理工学院和州立大学
• On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing by a team from 凯斯西储大学, 圣卡洛斯大学，菲律宾, 亚当森大学,菲律宾, 田纳西大学诺克斯维尔分校, and 橡树岭国家实验室
• Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review by a team from PSG高级研究所组织工程实验室, 高分子科学与技术系, Council of Scientific and Industrial Research - Central Leather Research Institute, and 科罗拉多州立大学生物材料表面微/纳米工程实验室
• 3D打印镁基水泥制备生物陶瓷的研究进展 by a team from “乌戈·希夫”化学系，Università degli Studi di Firenze，意大利
• Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays 由来自几个实验室和部门的成员组成的团队 达姆施塔特工业大学 and the 布伦瑞克技术大学生物技术系
• Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites by a team from the 材料科学与工程学院，德克萨斯A&M University and 德州A&M University
• 卡壳明胶微凝胶基复合油墨挤出生物打印的计算研究 by a team from the 机械与航空航天工程系, University of Florida and the 浙江大学机械工程学院
• 3D打印伤口敷料的最新进展 by a team from the University of Indonesia
• 用直接墨水书写的多功能活性纳米复合材料 by a team from Johns Hopkins University以及霍普金斯极端材料研究所 查尔斯·斯塔克·德雷珀实验室.
• 直接墨水书写的可回收和 原位 可修复的光热聚氨酯用于可持续3D打印的发展 由来自几个部门的人组成的团队 西安大略大学, as well as from the School of Mechatronic Engineering and Automation, Shanghai University
• Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing by a team from CSGI & “乌戈·希夫”化学系，Università degli Studi di Firenze，意大利
• Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities by a team from 马里兰大学机械工程系，帕克学院
• 3d打印纤维素-生物聚酯泡沫格的水分敏感性和压缩性能 by a team from 怀卡托大学工程学院, 奥克兰大学先进复合材料研究中心, and 惠灵顿维多利亚大学设计创新学院
• A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro 由一个由几个部门组成的团队 俄勒冈健康科学大学 and the 日内瓦大学，大学牙科诊所
• 利用化学机械流光刻技术在生态位引导下的组织模式研究, by a team from ARC创新生物工程培训中心, 胚胎学单位，儿童医学研究所，悉尼, School of Medical Science, Faculty of Medicine and Health, The University of Sydney, EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney, and Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, 伊利诺伊大学芝加哥分校, Illinois

• Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications by a team from 工程和自然科学，Bahcesehir大学 and 皮尔里斯大学海事高等职业学校

• 挤压提高3d打印纳米复合生物材料的力学性能, by a team from the 滑铁卢大学复合生物材料系统实验室，系统设计工程

• 细胞悬浮液中全向陶瓷生物打印合成类骨结构 by a team from the 新南威尔士大学's Centre for Nanomedicine, 材料科学与工程学院, and 航空航天机械与机电工程学院

Published in 2020

• Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing by a team from 范德比尔特大学机械工程系
• Designing 3D Printable Cementitious Materials with Gel-Forming Polymers 由一个部门的团队 Chemical Engineering and Chemistry of 田纳西科技大学 and the 美国国家标准与测试协会
• 热固化形状记忆橡胶增韧环氧树脂直接油墨书写的双重方法 by a team from the Department of Macromolecular Science and Engineering, 凯斯西储大学 and the 泰国朱拉隆功大学化学系
• Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites by a team from the 美国空军研究实验室材料和制造理事会, the 代顿大学研究所, the 机械，航空航天，生物医学工程系或田纳西大学 and the 康奈尔高能同步加速器
• Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine by from the 保加利亚瓦尔纳医科大学
• Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components by a team from Virginia Tech's 材料科学与工程系“，, 电气与计算机工程系, and 电力电子系统中心“，
• 从鸡蛋和贝壳中提取的生物活性组织工程支架的环保生产 by a team from the 材料科学与工程系“， and the Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health of Tuskegee University
• Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes by a team from the Stimuli-responsive功能材料 & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology
• 丝素活性油墨用于3D打印隐窝状结构 by a team from the 康涅狄格大学材料科学研究所高分子项目 and the 康涅狄格大学化学与生物分子工程
• 无添加剂碳颗粒分散，糊状，凝胶和面团 专利申请来自 西北大学分子生物科学系
• 3d打印层状PLGA药物释放膜的研制及药物释放行为评价 by a team from the School of Pharmacy and Health Sciences, Fairleigh Dickinson University
• 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels 工程部门的一个团队 Koç University and Bahcesehir University, both in Turkey
• Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets 由一个多学科团队 Virginia Tech
• 3D打印真空烧结制备透明氧化铝陶瓷 by a team from the 稻盛和夫工学院, 纽约州立陶瓷学院, 阿尔弗雷德大学，阿尔弗雷德，纽约
• Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices, a paper from the 美国空军研究实验室 在Hyrel打印机上使用诺森头.
• Additively Manufactured Thermite-based Energetics: Characterization and Applications，博士论文提交给 范德比尔特大学机械工程系
• 灭菌处理对机械性能的影响, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering) by a team from the Composite Biomaterial Systems Laboratory of the University of Waterloo
• Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers using a Nordson Ultimus™ V 海瑞尔设备上的分配器，但是一个团队 洛斯阿拉莫斯国家实验室, 桑迪亚国家实验室, and 能源工程系, Gyeongnam National University of Science and Technology (South Korea)
• 铁的制备与表征₁₆N₂ Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form by a multi-disciplinary, multi-university team from Istanbul, Turkey
• Cement-Based Direct Ink for 3D Printing of Complex Architected Structures 的专利申请，由一个小组的成员 Department of Materials Science and NanoEngineering, Rice University
• 形状可编程液晶弹性体驱动器的反应式3D打印 by a team from the Department of Materials Science and NanoEngineering of Rice University
• Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air by a team from the 佛罗里达大学生物医学工程系
• 通过3d打印结构催化剂实现紧凑的GTL by a team from 昆士兰大学's 化学工程学院 and 澳大利亚生物工程和纳米技术研究所 and also by 澳大利亚石油国际勘探开发(APIED)
• 生物油墨的结构及其制备方法, a patent application by 劳伦斯利弗莫尔国家实验室
• 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry by a team from 阿尔弗雷德大学的纽约州立陶瓷学院
• On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds 由一个主要来自澳大利亚大学的团队进行.
• 所有3d打印可伸缩压电纳米发电机(彭)与非突出Kirigami结构 by a team from The 南洋理工大学材料科学与工程学院 and 新加坡- huj研究与企业联盟(SHARE), 能源和水的纳米材料(新), Campus for Research Excellence and Technological Enterprise (CREATE)
• Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms by Adam Procopio from Merck Pharmceuticals
• Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials by a team from 加州大学河滨分校化学与环境工程系 and 马里兰大学帕克分校化学与生物分子工程系
• 3D打印氧化镁混凝土:朝向可持续的现代建筑 by a team from 纽约大学，阿布扎比
• Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source by a team from the 范德比尔特大学机械工程系
• 3D打印90wt %负载增强纳米热菌的燃烧 by a team from 加州大学河滨分校化学与环境工程系 and 马里兰大学帕克分校化学与生物分子工程系
• 光固化季戊四醇三丙烯酸酯/苯基锂‐2,4,6 -三甲基苯甲酰亚磷酸基油墨，用于磁响应材料的挤出3D打印 by a team from Bahçeşehir University, Piri Reis University, and Sabanci University in Istanbul
• Spatially Focused Microwave Ignition of Metallized Energetic Materials，由工程部的一个小组负责 加州大学河滨分校 and the University of Maryland.
• Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite 由几个部门组成的团队 加州大学洛杉矶分校
• 3D打印碳纳米纤维和碳超细纤维水泥复合材料的早期性能 by a team from the Department of Civil and Environmental Engineering, Vanderbilt University
• Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects by a team from the 佛罗里达大学生物医学工程系

Published in 2019

• 石墨烯泡沫增强形状记忆聚合物环氧复合材料, a PhD paper submitted to 佛罗里达国际大学
• 生物可降解聚合物混合物食品包装应用，“食品包装:创新和保质期”的一个章节，由一个团队 塔斯基吉大学材料科学与工程系
• 用横向流动试验分析极低浓度水溶液中的游离氯 by TU Darmstadt
• Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability by a team from the 美国科罗拉多大学博尔德实验电子与制造实验室，博尔德
• 3D打印活细菌电极 by a team from 加州大学圣克鲁斯分校化学与生物化学系
• 直写法制备铝/金属氧化物/PVDF薄膜的着火与燃烧分析，由工程部的一个小组负责 加州大学河滨分校 and the University of Maryland.
• Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer by a team from the 科罗拉多州立大学工程学院
• 含能材料直接墨水书写中黏合剂发展的流变学考虑 by a team from the 佐治亚理工学院材料科学与工程学院
• 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs) by a team from 橡树岭国家实验室
• 组织工程中的生物打印技术, part of the 生物化学工程/生物技术进展 book series.
• 水性聚环氧乙烷(PEO)凝胶的3d打印性能 由一个团队主要从 爱沙尼亚塔尔图大学医学院
• A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders by Prof. Shlomo Magdassi's group at 耶路撒冷希伯来大学
• 木质材料构成的三维结构的增材制造 by Prof. Shlomo Magdassi's group at 耶路撒冷希伯来大学
• 三维印刷控制该专利申请由一个来自 Chromatic 3D Materials
• 在目标表面精确施用药剂的方法和系统该专利申请由一个来自 Procter & Gamble
• hbn -丙烯酸酯复合印刷:立体平版印刷和uv辅助直写，硕士论文 University of Connecticut
• 含氯盐和羟基磷灰石纳米颗粒的甲基丙烯酸明胶的可印刷性 by a team from 滑铁卢大学复合生物材料系统实验室，系统设计工程
• Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator by a team from The 南洋理工大学材料科学与工程学院 and 新加坡- huj研究与企业联盟(SHARE), 能源和水的纳米材料(新), Campus for Research Excellence and Technological Enterprise (CREATE)
• 使用纳米工程生物墨水在3D打印治疗性蛋白质来控制和直接细胞迁移 by a team by a team from 德克萨斯州的一个&M University.
• Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate by a team from the 生物医学工程系, 德克萨斯州的一个&M University
• Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling by a team from 加拿大滑铁卢大学系统设计工程系
• 3D打印多功能超弹性硅橡胶泡沫 by a team from the Macromolecular Science & Engineering Department of 凯斯西储大学
• 液晶弹性体挤出印刷的专利申请 德克萨斯大学生物工程系，达拉斯
• 用于共烧铁氧体磁性元件增材制造的银浆的定制 by a team from Virginia Tech
• 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities by a team from Nanyang Technological University (Singapore) and the 耶路撒冷希伯来大学)
• 骨生物打印的前沿进展, by a team primarily from 加州大学洛杉矶分校
• Direct Writing of Tunable Living Inks for Bioprocess Intensification in ACS's Nano Letters
• Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting by a team from the 佛罗里达大学生物医学工程系
• Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant by a team from 爱荷华州立大学机械工程系
• 硬组织工程三维聚己内酯/磷酸三钙/胶原支架的研究进展 by a multi-disciplinary, multi-university team from Istanbul, Turkey
• Poloxamer 407纳米凝胶盘的3D打印及其在卵巢癌辅助治疗中的应用 by a team from the St. Louis College of Pharmacy

Published in 2018

• Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application by a team from the Materials Science & 塔斯基吉大学工程系
• Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes by a team from 桑迪亚国家实验室 and 新墨西哥大学微工程材料中心
• Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone by a team from the 航空航天机械与机电工程学院, University of Sydney and the 新南威尔士大学化学学院，悉尼
• 用于多孔水凝胶3D打印的水胶体油墨 由来自 生物医学工程系，德克萨斯A&M University, The 生物医学工程系, University of Texas at Austin, and The Department of Chemical and Materials Engineering, New Mexico State University
• Additive Manufacturing- A Review of 4D Printing and Future Applications by a team from 欧洲空间研究和技术中心
• 使用细胞释放水凝胶改进了3D打印支架的原位播种 由来自 生物医学工程系，德克萨斯A&M University, The 生物医学工程系, University of Texas at Austin, and 莱斯大学生物工程系.
• 丝基水凝胶对肠上皮细胞形态及创面愈合的影响 a thesis by Marisa E. Boch from the 化学与生物分子工程系 at the University of Connecticut

• Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels by a team from the 材料化学与物理“， of 萨尔茨堡大学 and 无机化学学院 at The University of Cologne.

• 共价超分子杂化聚合物作为肌肉激发的各向异性致动器 由一个跨学科的团队 Northwestern University. 三维打印实验得到了三维打印实验的支持 空军研究实验室 协议编号FA8650-15-2-5518
• Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark by Prof. Shlomo Magdassi's group at 耶路撒冷希伯来大学.
• 无添加剂碳纳米管分散体，糊状，凝胶，甲酚面团 by a team from Northwestern University
• 分层多孔二氧化硅和α‐石英的3D打印 by a team from 萨尔茨堡大学
• 在那里生产的聚合材料和制品 by a team from Procter and Gamble
• UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics by a team from Virginia Tech
• 通过聚合物相转化来调整印刷石墨烯电极的孔隙度和微观结构 by a team from Northwestern University

Published in 2017

• Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting 由一个团队由一个团队由三个学科 德克萨斯州的一个&M University.
• 在TUCVM打印3D骨骼模型教育的可行性 at ResearchGate
• Design and Additive Manufacturing of Multi-Permeability Magnetic Cores, by a team from Virginia Tech
• 燃烧辅助光子退火的可打印石墨烯油墨通过放热粘合剂, by a team from Northwestern Univeristy
• 三维生物打印三聚体网络骨组织再生支架的体外评价, by a team from 康涅狄格大学
• Enabling Process Intensification via 3D Printing of Catalytic Structures by a team from University of Queensland
• 肌肉骨骼应用的3D生物打印 亚历山大·波波夫，萨拉·马拉利， & Deepak M Kalaskar in Future Medicine
• 电力电子集成用软铁氧体磁性元件的紫外辅助3d打印 by Dr. Y. Yan (and others), Virginia Tech
• 骨组织再生用海藻酸盐水凝胶 by Stephanie T. Bendtsen of 康涅狄格大学
• Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing by Nicholas Sears et. al., of the 生物医学工程部门 of 德克萨斯州的一个&M University.
• 纳米工程蛋壳银裁剪共聚酯聚合物共混膜与抗菌性能 by a team from Tuskegee University
• Design Methodology and Materials for Additive Manufacturing of Magnetic Components - PhD Thesis of Y. Yan, Virginia Tech

Published in 2016

• High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices by a team from the Lincoln Laboratory at 麻省理工学院
• 面向异构集成的磁性元件增材制造 by Dr. Y. Yan (and others), Virginia Tech
• 生物打印定义了异质性细胞微环境 from 生物材料和组织工程研究单位 of the 航空航天，机械与机电工程系 of The University of Sydney
• A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications by a team from Georgia Tech
• Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects in Nature.com's Scientific Reports
• 高孔隙率材料3D打印用乳胶油墨 in the Macromolecular Journals
• 3D Printed Energetics by the 武器与战斗系统科 of the 澳大利亚国防部

Published in 2015

• 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense -伊丽莎白Cosgriff-Hernández的介绍 生物医学工程系, 德克萨斯州的一个&M University
• 毕业论文摘要:基质刚度的动态增加促进了体内侵袭性肿瘤表型的形成 来自多个组织，在 BioMaterials.org
• Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept by the 材料科学与工程系“， of Lehigh University
• 用于骨组织工程的生物活性纳米水凝胶:一种无生长因子方法 in 美国化学学会的 ACS Nano

Published in 2014

• Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects from 生物材料和组织工程研究单位 of the 航空航天，机械与机电工程系 of The University of Sydney

热储层印刷(DIW)

也被称为DIW，或直接墨水写作.

Published in 2022

• An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration, by a team from 德克萨斯州的一个&米国际大学, 伊朗医学科学大学, and the University of Tehran

Published in 2021

• Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets by a team from the Institute of Pharmacy and the 生物医学与转化医学研究所 of the University of Tartu and from the 赫尔辛基大学药学院药物化学和技术部
• Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets这项研究是由美国国家海洋局的一个团队进行的 药物与食品科学系“，, Facultad de Farmacia, 马德里孔普卢腾斯大学,and the Biomaterials, 生物工程与纳米医学实验室, 生物医学和生物分子科学研究所, 药学院和生物医学科学学院, University of Portsmouth
• 可穿戴设备用汗液增强导电性的可打印橡胶电极 by a team primarily from 新加坡南洋理工大学
• Fabrication and Testing of Advanced Composites for Extreme Environments，硕士论文一篇，提交给 机械工程系，德克萨斯A&M University
• 伤口愈合:从被动到智能敷料 by a team from 阿米尔卡比尔科技大学生物医学工程系，德黑兰 and 昆士兰大学迪亚曼蒂纳学院，翻译研究所
• 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview by a tea, from Eskişehir土耳其工业大学
• 3D打印合成材料的原材料，硕士论文投稿 Lund University
• 软弹性优化耗散在3d打印液晶弹性体 by a team from the 机械工程系, University of Colorado, Denver, 利兹大学物理与天文学院, Materials and Failure Modeling Department, Sandia National Laboratories, and Impressio, Inc.
• 3 d打印Enzyme-Embedded塑料 by a team from Scion它是新西兰皇冠研究所(Crown Research Institute)的一个分支机构

Published in 2020

• Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development, a thesis for a PhD in Mechanical and Materials Engineering submitted to 西安大略大学
• 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation by a team from the 机械与航空航天工程系, the Department of Surgery, the 食品系统部门的食品科学项目 & Bioengineering, and the 生物医学系 & Chemical Engineering of the University of Missouri
• 多功能液态金属复合材料这段视频是由来自美国的一个团队拍摄的 卡内基梅隆大学机械工程系
• 液态金属夹杂物的可控组装是多功能复合材料的一种通用方法 by a team from the 卡内基梅隆大学机械工程系
• Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith by a team from the 昆士兰大学澳大利亚生物工程和纳米技术研究所(AIBN)
• Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness by a team from the 机械与材料工程系 of 佛罗里达国际大学
• Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals by a team from 中央兰开夏大学药学院和生物医学科学学院
• 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet，一篇硕士论文提交给 瑞典哈尔姆斯塔德大学机械工程系
• 喷墨打印离子电子学透明，弹性和应变不敏感的触摸传感矩阵 by a team from the 材料科学与工程学院 at Nanyang Technological Univeristy and 电子科技大学
• 直接墨水书写过程中挤压改善纳米复合生物材料的力学性能 由复合生物材料系统实验室的一个团队 Systems Design Engineering School at the University of Waterloo, Canada

Published in 2019

• 血管化聚合物在空间上控制表面细菌细胞 by a team from the Department of Chemical and Biomedical Engineering, University of Maine
• Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage by a team from 科罗拉多丹佛大学工程、设计与计算学院
• 一个开源的自动化超声波辅助焊接系统的开发, by a team from the 克莱姆森大学机械工程系
• Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion, by a team from the 克莱姆森大学机械工程系
• Preparation and Applications of Stimuli-Responsive Composite Materials他的博士论文来自 凯斯西储大学化学系.
• 纳米复合材料反应扩展和烧结的实时高速显微镜和测温 by a team from 加州大学河滨分校化学与环境工程系 and 马里兰大学帕克分校化学与生物分子工程系
• 直写式Al/PVDF着火与燃烧特性的比较研究, 铝/Viton和铝/THV复合材料 by a team from 化学与生物分子工程学系和化学与生物化学学系, University of Maryland
• A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics by a team including the 伦敦大学学院药学院
• 结构可以显著改变纳米复合材料的能量释放速率 by a team from 马里兰大学. of Physics
• 3D生物打印制备的水凝胶加入PLA/β-TCP支架的比较表征 by a team from 土耳其马尔马拉大学
• 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.
• 氟弹性体的添加剂加工该专利申请由一个来自 3M
• 含氟聚合物的添加剂加工该专利申请由一个来自 3M

Published in 2018

• Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators by a team from the 德克萨斯大学生物工程系，达拉斯
• 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography by a team from 华盛顿大学. Louis
• Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals by a team from 南丹麦大学
• Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups by a team from the University of Stuttgart and the Fraunhofer Institute, in Stuttgart, Germany
• 纳米工程胶体墨水3D生物打印 in 美国化学学会的 Langmuir

Published in 2017

• 用于3D生物打印的剪切减薄和热可逆纳米工程油墨 in the 美国化学学会的 Applied Materials & Interfaces Journal
• 4D打印液晶弹性体 by a team from the 德克萨斯大学生物工程系，达拉斯
• 剪切稀释和材料流动对聚乙二醇机器人点胶的影响 in 美国化学学会的 ACS Nano

丝印刷(FFF / FDM)

Also known as FFF or FDM, Fused Filament Fabrication or Fused Deposition Modeling.

Published in 2022

• Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices by a team from Poly-Med, Inc. and Clemson University
• 控制切片参数进行聚醚醚酮3d打印曲面设计 in the International Journal of Mechanical Engineering and Robotics Research

Published in 2021

• 3D打印聚丙烯生物复合材料中工程可持续生物炭的有效增强 from a team from Tuskegee University
• 用于3D打印的聚碳酸酯-二氧化硅长丝的制备和表征 by a team from Tuskegee University
• 二次粘弹性共振下3D打印异形超材料的顺序可调屈曲, by a team from 哈尔滨工业大学，中国, 中国西北工业大学, and 新加坡南洋理工大学机械与航空航天工程学院
• 3D打印复合材料功能材料的合成与表征，硕士论文交至 机械工程系，德克萨斯A&M University
• 新型心脏补片建筑材料 by a team from the 机械工程系, University of Texas at San Antonio
• 氮化硼纳米管在聚己内酯复合材料中的散热研究 by a team from 杜克大学化学系 and Université Grenoble Alpes
• 具有层次结构的超分子聚合物水凝胶的3D打印 西北大学的一个研究小组 材料科学与工程系“， and Simpson Querrey Institute 软材料科 Materials and Manufacturing Directorate, 空军研究实验室

Published in 2020

• 基于物理的增材制造过程监控压缩感知 博士论文 佐治亚理工学院机械工程学院.
• Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets by a team from the Institute of Pharmacy, Department of Immunology, and the Department of Geology 爱沙尼亚塔尔图大学的教授，以及 School of Pharmacy 东芬兰大学的
• Shape Programming by Modulating Actuation over Hierarchical Length Scales by a team from 巴黎市工业物理和化学高等学校\, 巴黎科学与文学大学, the Sorbonne University, 国际高等研究学院(意大利), and the the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)
• Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion by a team from Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne, 创新技术实验室，Université de Picardie Jules Verne, RS2E, Réseau Français sur le Stockage Électrochimique de l ' Énergie, Jyväskylä大学化学系, Electrical & 杨斯敦州立大学计算机工程专业, Université法国北部里尔, GEMTEX |纺织研究实验室, and Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne

• 组织工程用熔融挤出热塑性塑料的增材制造, part of the textbook 计算机辅助组织工程-方法和协议 by a team from Maastricht University's 技术启发再生医学研究所 and 亚琛-马斯特里赫特生物基材料研究所
• PEEK的熔融丝制备:工艺-结构-性能关系综述 by a team from 欧洲空间研究和技术中心
• 使用定制材料的3D打印的当前和未来的应用 一篇来自 南达科塔大学化学系
• Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers by a team from the 弗吉尼亚理工大学大分子创新研究所
• 3d打印鼓膜支架在组织工程中的应用 by a multi-disciplinary, multi-university team from Istanbul, Turkey
• A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging by the Materials Science & 科罗拉多大学博尔德分校工程项目
• Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results, a presentation in Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII
• 探索增材制造过程中的攻击和防御:网络物理安全的含义，硕士学位论文提交给 华盛顿大学的麦凯维工程学院在圣. Louis
• 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review by a team from “Maria Edvige Sangalli”, 这是一门医学研究, Università degli Studi di Milano
• Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft by a team from 增材制造中心, School of Engineering, 皇家墨尔本理工大学 and 机械工程系, The University of Texas at Austin
• 3D打印再生聚酯聚合物复合材料注入可持续碳 by a team from the Materials Science & 塔斯基吉大学工程系

Published in 2019

• Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells by H. Mozafari from 机械学系 & 内布拉斯加州大学林肯分校的材料工程学院
• 3D打印工艺参数对高介电常数复合材料介电性能的影响 by a team from Loughborough University
• 航空航天用多材料系统增材制造 by a team from NASA的格伦研究中心
• Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage，发表在《365现金买球》上
• 六铁氧体材料的磁性3D打印他的博士论文来自 加州大学洛杉矶分校(UCLA)电气与计算机工程系.
• Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process by a team from SUNY Buffalo's 机械与航空航天工程系, 材料设计与创新学系, and 工业与系统工程系 and the 布拉斯加-林肯大学 机械与材料工程系
• 用于金刚烷类药物持续输送的胃驻留系统 by a team from Lyndra Theraputics
• 胃居民电子 专利申请由一个来自 麻省理工学院
• Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control，发表于哈佛大学学术学院的论文 弗吉尼亚理工大学工业与系统工程系
• The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer by a team from 延世大学药学院和延世药学院
• 三维打印聚醚醚酮的热加工及力学性能研究 (PEEK) by a team from the 大分子科学系 & 工程，凯斯西储大学工程学院 国家自然科学基金资助项目&M, 浙江工业大学
• 基于金属颗粒和调谐填充因子的三维打印复合材料的熔融沉积建模 by a team from IMDEA Nanociencia in Madrid
• 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape by a team from the Georgia Tech 机械工程学院
• 自动化纤维嵌入裁剪机器人软构件的机械和功能特性 by the 新加坡理工大学(SUTD) DManD(数字化制造与设计)中心
• 基于图像分析的熔丝增材制造的闭环质量控制 by a team from the Virginia Tech Grado 工业与系统工程系
• 可再加工的3d打印导电弹性体复合泡沫材料的应变和气体传感 by a team from the Chemistry and Macromolecular Science & Engineering Departments of 凯斯西储大学
• 第七章聚芳醚酮的增材制造 in the PEEK生物材料手册
• Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling by a team from 佐治亚理工学院材料科学与工程学院

Published in 2018

• 创新的3D打印方法合成和表征新型生物塑料，凯瑟琳·霍尔的硕士论文 University of North Dakota
• Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites by a team from the Department of Mechanical & 内布拉斯加大学林肯分校材料工程
• 通过原位测量增强3D打印的精度 by a team from UCLA's 机械与航空航天工程 and 电气与计算机工程 Departments and the NanoSystems Institute
• 3D打印的原料及其用途 专利申请由一个团队完成 南丹麦大学
• Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method by a team from the Georgia Tech 材料科学与工程学院
• 3D打印可持续生物炭回收PET复合材料 by a team from Tuskegee University
• Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing by a team from [www.me.gatech.佐治亚理工大学机械工程学院]
• 3D打印声学超材料吸声器使用功能梯度声波晶体 by a team from the 美国海军研究实验室
• 制药3D打印:单步打印和填充胶囊的设计和鉴定 by a team from Merck Pharmaceuticals
• 基于熔融沉积模型的新型聚合物-金属复合材料制备与性能研究 by the 机械工程技术人员 at 伍斯特理工学院

Published in 2017

• NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, 设计和3D打印飞行模型的UFSM & INPE的NANOSATC-BR，立方体卫星发展计划 by a team from the 圣玛丽亚联邦大学，巴西.
• 挤压法制备聚丙烯复合材料的拉伸力学性能, a reviewed paper of the 固体自由曲面制造研讨会2017.
• Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF), a reviewed paper of the 固体自由曲面制造研讨会2017.
• 增材制造中的混合工艺 in the 制造科学与工程学报 of the 美国机械工程师学会
• 材料性能对熔敷成型零件翘曲的影响 in 先进制造技术国际期刊
• 3D打印氮化硼- ABS复合材料的热机械性能, in 应用复合材料
• 一类广义拓扑力学系统的动力学马略拉纳边模 by 新泽西理工学院

Published in 2016

• 使用低成本、开源硬件的高温热塑性增材制造 published by NASA